Would it be possible to consider adding an ability for the charger to switch between one phase and three phase (ie when the solar drops below 4.5 kwh but more than 1.8kwh so that charging could continue, similar to the Enphase charger feature?
In addition, could a user set a maximum charging level so that if “charge now” is selected then the solar could be used with the grid up to the maximum set, which could manage potential impact on demand tarriffs and also allow for charging at solar levels less than. 4.5khw but not too fast at 22kwh.
Many thanks
1 Like
Hi Dazman,
Thanks for getting in touch and providing feedback.
Yes, we have actually just developed a new firmware that will enabled X22s to do phase switching. We are still testing but should start rolling out shortly. If you wish to get it first or help us test it please email support@evnex.com with your charger details and I can pass your information to our software team.
That is a good use case scenario. I will pass it to the dev team for consideration for future app updates/feature development.
Thanks again for your input and please let us know if you need any further assistance.
Many thanks Pedro. And thank you again for your assistance a couple of weeks ago regarding the configuration of the charger with battery installation.
1 Like
No worries at all Daz, my pleasure.
We will sort that firmware and let you know. Cheers.